30Khz Ultrasonic Thermoplastic Resin Sheet Cutting Device Machinery Fitting With Replacement Blade

30Khz Ultrasonic Thermoplastic Resin Sheet Cutting Device Machinery Fitting with Replacement Blade

Description: 

Ultrasonic fabric cutting uses ultrasonic energy to melt the material to be cut by local heating, thus eliminating the need for a sharp edge. It is commonly used to cut difficult-to-cut materials such as thermoplastic resin sheets, sheets, films and laminates, carbon fibre composites, fabrics and rubber.

With 30,000 vibrations per second (30 kHz) and a maximum output of 100 W, ultrasonic fabric cutting can easily cut resin, rubber, nonwovens and composites due to this movement. The fabric cutting knife housing is made of stainless steel, and the blade is made of inert, hard wearing metal – HSS with a thickness of 0.6mm, which does not have a lasting chemical reaction with the cutting material. Users can replace the blades themselves. High-frequency vibration reduces frictional resistance on the cutting surface, extending the blades’ life and saving costs.

Parameters:

Advantages:

1. High stability: During the operation of the ultrasonic generator, electromagnetic vibration is generated, which is converted into mechanical vibration and transmitted to the cutting blade and cutting material. Due to mechanical cutting, there is no need for sharp cutting edges, the blade wear is minimal, and the cutting head can be replaced on its own.

2. Safety and environmental protection: When cutting ultrasonic knives, the temperature of the blade is below 50 degrees Celsius, which will not produce smoke and odor, eliminating the risk of injury and fire during the cutting process.

3. Neat cutting: As ultrasonic waves cut through high-frequency vibrations, the material does not adhere to the surface of the blade, requiring only a small amount of pressure during cutting. Fragile and soft materials also do not deform or wear, and the fabric is cut and automatically sealed. It will not cause fragmentation.

4. Easy to operate: The cutting blade is connected to an ultrasonic generator, which is connected to a 220V power supply and can cut switches to support handheld and airborne cutting.

5. Wide application range: rubber, vulcanized latex, non vulcanized latex, food and various textile materials, as well as ultrasonic cutting of plastic sheets.

30Khz Ultrasonic Thermoplastic Resin Sheet Cutting Device Machinery Fitting with Replacement Blade